As a core component in industrial manufacturing, construction and automotive, the role of fasteners is self-evident. Because fasteners are usually small in size and large in quantity, various defects will inevitably occur in the manufacturing process. If these defects are not discovered and corrected in time, they may lead to serious safety problems during the use of the product, and even lead to catastrophic consequences. Therefore, how to effectively detect the defects of fasteners and ensure their quality is the focus of attention in all walks of life.

Testing fastener defects is not optional, but a key link to ensure product quality and safety. Especially in high-demand application scenarios, such as aerospace, automotive manufacturing, etc., once fasteners occur, the consequences may be unimaginable.

Therefore, it is necessary to set up a surface defect detection station in the fastener factory, and arrange the corresponding technical personnel to carry out surface defect detection on the produced firmware.

solution

1 set of SIPOTEK vision inspection software, 1 set of SIPOTEK custom industrial computer, 1 set of PHILIPS 19 "LCD monitor, 2 sets of Barsler industrial camera, 2 sets of SIPOTEK custom camera adjustment module, 2 sets of FA HD optical industrial lens, 2 sets of custom optical adaptive light source, 1 set of professional optical glass carrier, 1 set of PANASONIC servo motor and PANASONIC, 1 set of SIPOTEK custom control system, 1 set of PLC motion cooperation Panasonic and Panasonic.

Detection effect

OK good product map

NG defective product

NG defective product

NG defective product

NG defective product